HXGN15A-12ZF(R) AC metal enclosed switchgear made for transformation and construction of urban power grid. In the power supply system, it also can be used to break load switch and short-circuit current and to close the short-circuit current.
This product uses vacuum load switch and spring operating mechanism. It can be operated by manual or electrical. The earthing switch and disconnector equips hand operating mechanism. This products is highly scalable, small size and no fire and explosion hazard.
Installation Environment: no conductive dust, no corrosive gas, no vapor, no fire, no explosion, no frequent distance vibration
Earthquake Intensity: ≤8 degree
Notice: please contact us if the application environment is beyond above range.
Product Application:
It suits for power distribution system of AC 10kV, 50Hz, which is wide used for urban power grid construction and renovation projects, industrial and mining enterprises, high-rise buildings and public facilities, etc. As a ring main power supply unit and terminal equipment, it plays the role of power distribution, control and protection of electrical equipment. It also can be installed in compact substation. This ring main unit meets the standard of GB3906 and IEC60420.
Technical Parameters:
Main Circuit Scheme:
There are 45 schemes for the main circuit of this switch, but the schemes and specifications derived from the changes of auxiliary circuit control and protection are not included.
Ring Network Power Supply Principle:
The ring network power supply is generally composed of three basic units (see the figure below). The incoming and outgoing line cabinets are used as the ring network unit. When any line fails, it can be isolated in time, and another unit ensures continuous power supply for the user’s transformer branch. The loop ring network cabinet plays the role of protection and isolation for the transformer, which is convenient for maintenance and repair.
The ring network cabinet can be extended arbitrarily, and various combination schemes can be formed from basic units according to user requirements.
Product Structure Description:
The shell of the ring main unit is composed of basic skeleton, top plate, panel and side plate to form a closed structure. The top of the ring network cabinet is the busbar room, and the front of the busbar room is the instrument room. The two rooms are separated by steel plates. The middle part of the cabinet is the load switch room, and the middle and lower parts are the cable entry and exit lines and other component rooms. The main equipment of the ring network cabinet is composed of vacuum load switch, isolating switch (or isolating knife switch with fuse), grounding switch, lightning arrester, operating mechanism, interlocking mechanism and measurement and metering circuit.
The ring network cabinet is equipped with ZFN□ -10 high-voltage vacuum load switch. The vacuum switch is used to break the fault and overload current. The isolating switch or vacuum switch, grounding switch and cabinet door in the switch cabinet are interlocked according to a certain procedure. , Can effectively prevent misoperation, the vacuum switchgear is equipped with an electric spring energy storage operating mechanism to achieve fast closing and opening operations. And according to user requirements, equipped with a certain protection relay. Fuse combination electrical cabinet, the fuse tube is equipped with a firing pin, in the case of short circuit, the firing pin hits the tripping mechanism to realize quick disconnection, which can effectively protect electrical equipment. The functional unit ring network cabinet is mainly equipped with FZ(R)N21-12R two-position vacuum load switch, and the main scheme is the incoming line cabinet and the outgoing line cabinet.
Inlet cabinet scheme: one FZ(R)N21-12D three-position vacuum load switch is installed in the cabinet, and CT.PT can also be flexibly installed in the cabinet. The main circuit is controlled by a FZ(R)N21-12D vacuum load switch equipped with an isolating knife and a grounding knife, which can respectively achieve busbar connection, isolation, and grounding workstations.
Outlet cabinet scheme: a FZ(R)N21-12D three-position vacuum load switch and a fuse with an impactor are installed in the cabinet, and CT, PT and ZNO arresters can be flexibly installed in the cabinet, so that Eliminate metering cabinets. “Five defenses” locking function.
Power transmission operation: Only when the cabinet door is closed and locked, and the grounding switch is operated to the “open” position, can the load switch be operated to the closing position.
Power-off operation: When the load switch is in the isolation position, the grounding switch can be closed; when the grounding switch is in the closing position, the cabinet door can only be opened after inserting the insulating partition in place.
There is a reliable interlock between the vacuum interrupter and the isolating knife, and the isolating knife and the grounding knife are interlocked with each other and interlocked with the cabinet door, and the insulating partition is also interlocked with the cabinet door.
Product Feature:
Using vacuum breaking arc extinguishing device to make longer electrical life.
Load switch, load switch-fuse, circuit breaker is optional to do protection
Fully insulated and fully sealed structure with functions of safe, anti-pollution and maintenance free.
Small volume, easy installation and easy operating
Corrosion resistantand special printing treatment shell, can be widely used in different bad conditions, such as storm area and high pollution area.
Fully sealed operating mechanism, not affected by external factors. It can work in a long term.
It can be equipped with electrical and remote control device to achieve distribution automation
Metal Clad Switchgear VS Metal Enclosed
Metal Enclosed Switchgear is a broad category of equipment in which all major electrical components are installed within a grounded metal enclosure. Metal Cladd Switchgear is a higher safety subcategory within the metal enclosure category. Metal armor is a more advanced and safer form of metal enclosure, characterized by strict metal partitions and removable components.
Metal Enclosed Switchgear Definition
Metal Enclosed Switchgear refers to a complete set of switchgear equipment in which all major electrical components (such as circuit breakers, isolating switches, transformers, busbars, etc.) are installed in a grounded metal enclosure, except for external connections.
What Is Metal Clad Switchgear
The key defining features of Metal Clad Switchgear include metal partition separation, removable components, and safety interlock design, which maximizes the safety of operators and equipment, facilitates maintenance and replacement of circuit breakers, and does not require contact with other live parts. It is commonly used in important medium voltage distribution locations.
What Is Switchgear In Electrical
Switchgear is a general term in electrical engineering, referring to a combination of electrical equipment used for controlling, protecting, isolating, and measuring a power system.
we are committed to continuously improving and expanding our product offerings to cater to ever-changing market demands. Our best-selling products are a testament to our dedication to quality, innovation, and customer satisfaction.
Optimized by Seraphinite Accelerator
